Rotary Viscometer
When the temperature deviation is 0.5°C, the deviation of the viscosity value of some liquids exceeds 5%, and the temperature deviation has a great influence on the viscosity. The temperature increases and the viscosity decreases. Therefore, special attention should be paid to keep the temperature of the liquid to be measured constant around the specified temperature point, and it is best not to exceed 0.1 °C for accurate measurement. For this reason, our company specializes in the production of constant temperature cups and constant temperature tanks to be used together with DHJ series viscometers.
Contact
Online Consult
- Description
- Specifications
- Paper
- Video
When the temperature deviation is 0.5°C, the deviation of the viscosity value of some liquids exceeds 5%, and the temperature deviation has a great influence on the viscosity. The temperature increases and the viscosity decreases. Therefore, special attention should be paid to keep the temperature of the liquid to be measured constant around the specified temperature point, and it is best not to exceed 0.1 °C for accurate measurement. For this reason, our company specializes in the production of constant temperature cups and constant temperature tanks to be used together with DHJ series viscometers.
|
Model |
DHJ-5S |
|
Measuring range |
1 ~1×105mPa.s |
|
Rotor Specifications |
Rotor No. 1-4 Optional No. 0 rotor can measure low viscosity to 0.1mPa.s |
|
Rotor speed |
3, 6, 12, 30, 60 rpm |
|
Measurement accuracy |
±2%(Newtonian liquid) |
|
Power supply |
AC 220V±10% 50Hz±10% |
|
Working environment |
Temperature 5℃~35℃, relative humidity not more than 80% |
|
Dimensions |
370×325×280mm |
|
Net weight |
6.8kg |
|
Model |
DH-25A |
|
Temperature range |
Room temperature＋10～100(℃) |
|
Temperature fluctuation |
±0.05(°C) |
|
Temperature control method |
Microcomputer temperature control, PID adjustment |
|
Display Resolution |
0.01(℃) |
|
Inner volume |
4(L) |
|
Opening size (length x width x depth |
160×120×130(L×W×D)(mm) |
|
Pump circulation method |
Inner/outer circulation |
|
Pump flow |
6(L) |
|
Heating method |
Heating tube |
|
Dimensions |
250×140×150 |
| host | 1 set |
| Rotors 1, 2, 3, 4 | 1 set (Note: No. 0 rotor is optional) |
| Power Adapter | 1 set |
| Protective frame | 1 single |
| base | 1 single |
| Lifting column | 1 set |
| user's manual | 1 part |
| certificate | 1 part |
| Warranty | 1 part |
| Hexagon head | 1 single |
| dumb wrench | 2 single(Note: 1 for each size) |
