Heating Dry Bath
Dry Baths DH200-1 is a constant temperature metal bath device controlled by a microcomputer, with high temperature control accuracy and good parallelism of sample preparation. It can replace the traditional water bath device. It can be widely used in the cultivation, preservation and reaction of various samples, and the application industry covers medicine, chemical industry, food. Safety, quality inspection, environment, etc.
- Description
- Specifications
- Paper
- Video
Dry Baths DH200-1Dry is a constant temperature metal bath device controlled by a microcomputer, with high temperature control accuracy and good parallelism of sample preparation. It can replace the traditional water bath device. It can be widely used in the cultivation, preservation and reaction of various samples, and the application industry covers medicine, chemical industry, food. Safety, quality inspection, environment, etc.
1. LCD display, clean and simple interface.
2. The instrument has fast heating speed, uniform heating, accurate temperature control, high stability, low energy consumption and no noise.
3. Built-in temperature deviation calibration function, automatic fault detection and buzzer alarm function.
4. Built-in over-temperature protection device, which is safer and more reliable to use and prolongs the service life of the machine.
5. The product design is compact and tight, occupying a small range of space, bringing more freedom and convenience.
6. A variety of module options, replacement, easy to clean and sterilize various test tubes.
Model | DH200-1 |
Temperature Control Range | Room temperature+5℃ ~ 150℃ |
Heating time | ≤ 30 minutes (from 20°C to 100°C) |
Temperature stability (at @100~150℃) | ≤±1℃ |
Temperature stability (at @40~100℃) | ≤±0.5℃ |
Module maximum temperature difference@40℃ | 0.3℃ |
Module temperature uniformity | ≤±0.5℃ |
Temperature display accuracy | 0.1℃ |
Longest Timing | 99h59min |
High temperature | 150℃ |
Maximum power | 250W |
Product size | 260x220x85mm |
Product weight | ≤2.6kg |
Module model selection | |||
Model | Tube diameter | Number of test tubes | Module size |
DT01 | 6mm | 42 | 95.5×76.5×50 |
DT02 | 7mm | 42 | 95.5×76.5×50 |
DT03 | 10mm | 20 | 95.5×76.5×50 |
DT04 | 12mm | 24 | 95.5×76.5×50 |
DT05 | 13mm | 20 | 95.5×76.5×50 |
DT06 | 15mm | 12 | 95.5×76.5×50 |
DT07 | 16mm | 12 | 95.5×76.5×50 |
DT08 | 19mm | 12 | 95.5×76.5×50 |
DT09 | 20mm | 6 | 95.5×76.5×50 |
DT10 | 26mm | 6 | 95.5×76.5×50 |
DT11 | 28mm | 4 | 95.5×76.5×50 |
DT12 | 40mm | 4 | 95.5×76.5×50 |
DT13 | 0.5ml | 48 | 95.5×76.5×50 |
DT14 | 1.5ml | 24 | 95.5×76.5×50 |
DT15 | 2.0ml | 24 | 95.5×76.5×50 |
DT16 | 0.2ml | 48 | 78×114×26 |
DT17 | flat | 96-well microtiter plate | 81×123×19 |
DT18 | Can be customized | Can be customized | Can be customized |
host | 1 set |
module | 1 piece |
power cable | 1 root |
Special screwdriver (for removing the module) | 1 set |
user's manual | 1 part |
certificate | 1 part |
Warranty Card | 1 part |