Lab Armor Bead Bath
LAWSON Scientific Bead Bath Armor Beads innovative design,Different from the traditional metal bath and water (oil) bath, this new constant temperature metal armor bead bath adopts the newly launched Beads Block (armor bead bath module) from LAWSON Scientific, which not only breaks through the boiling point of water bath (100℃) ), and avoids the limitation of the aperture of the traditional metal bath module, it is suitable for a variety of conventional laboratory containers, such as centrifuge tubes, test tubes, microplates and slides, and can adapt to test tubes of any shape and volume. The LAWSON thermostatic metal bead bath provides the best temperature uniformity and accuracy. The compact and lightweight Armor Bead Bath module design reduces the need for different size modules in conventional metal baths to better serve your lab.
- Description
- Specifications
- Paper
- Video
LAWSON Scientific Bead Bath Armor Beads innovative design,Different from the traditional metal bath and water (oil) bath, this new constant temperature metal armor bead bath adopts the newly launched Beads Block (armor bead bath module) from LAWSON Scientific, which not only breaks through the boiling point of water bath (100℃) ), and avoids the limitation of the aperture of the traditional metal bath module, it is suitable for a variety of conventional laboratory containers, such as centrifuge tubes, test tubes, microplates and slides, and can adapt to test tubes of any shape and volume. The LAWSON thermostatic metal bead bath provides the best temperature uniformity and accuracy. The compact and lightweight Armor Bead Bath module design reduces the need for different size modules in conventional metal baths to better serve your lab.
LAWSON Bead Bath Armor Beads DHB-200 Features:
1. Innovative design, suitable for special beads in the module. It can complete experiments that cannot be carried out by traditional water baths.
2. It can be turned on for a long time. No need to plan water bath time. Because there is no evaporation of water, there is no risk of drying out.
3. Clean and hygienic: It is enough to disinfect the beads with 70% ethanol every month. No disinfectant is required to clean the water bath.
4. Neat: No need for any accessories such as test tube racks, bottle clamps, floats, etc. to fix the sample.
5. Recyclable: The beads are made of recyclable metal.
6. More energy saving: When the temperature is set to 65°C, the energy saving is more than 4 times. At 37°C, the energy saving is more than 2 times.
7. Quick start technology. Built-in bead bath.
◆Volume (L): 0.3/0.7L
◆Temperature range: room temperature +5℃~150℃
◆Display accuracy: ±0.1℃
◆Temperature uniformity: ≤±0.5℃@37℃;±1.0℃@80℃
◆Beads bath beads have a variety of packaging specifications, such as 0.3/0.7L, etc., please call to confirm 186 5743 5285
No matter where you are in the lab, wherever you go, with LAWSON metal beads, you can keep your lab dry, clean and warm.
What are the benefits of LAWSON Metal Armor Bead Bath Series?
1) Low risk: keep the laboratory space dry; not easy to contaminate.
2) Higher sample quality: keep the sample temperature constant both when moving and stationary.
3) Better results: reagents keep temperature constant in refrigerator or oven
4) Save time: the bead bath is always full, clean and ready to use for a long time.
5) Environment friendly: no pollution.
6) Save money: no ice maker, modules, etc. are needed.
Model | DHB-200 |
Temperature Control Range | Room temperature+5℃ ~ 150℃ |
Heating time | ≤ 30 minutes (from 20°C to 100°C) |
Temperature stability (at @100~150℃) | ≤±1℃ |
Temperature stability (at @40~100℃) | ≤±0.5℃ |
Module maximum temperature difference@40℃ | 0.3℃ |
Module temperature uniformity | ≤±0.5℃ |
Temperature display accuracy | 0.1℃ |
Longest Timing | 99h59min |
High temperature | 150℃ |
Maximum power | 300W |
Product size | 260x220x85mm |
Product weight | ≤2.95kg |
Module model selection | |||
Model | Inner size | Armor Bead Volume | Module size |
DB01 | 78*64*70mm | 0.25L | 95.5×75×75 |
DB02 | 78*140*70mm | 0.50L | 95.5×153×75 |
host | 1 set |
module | 1 piece |
power cable | 1 root |
Special screwdriver (for removing the module) | 1 set |
user's manual | 1 part |
certificate | 1 part |
Warranty Card | 1 part |