Media

      With its powerful cleaning ability, the ultrasonic cleaning machine can easily complete the degreasing and wax removal of various hardware products, and can obtain good cleaning results. In order to avoid the failure of the ultrasonic cleaner during the cleaning process, it is required to operate in a professional manner.

      When the ultrasonic cleaner is working normally, as long as the side ultrasonic start button is pressed, the ultrasonic waves on both sides will be emitted, then turn the power adjustment knob to the right; then press the side ultrasonic start, and It is rotated to the appropriate power so that the ultrasonic waves are emitted together from all three directions. At the same time, the display on the ultrasonic cleaner will show the power value of the current job.

      If you want to stop during the cleaning process, you should first adjust the power knob of the ultrasonic cleaner to the minimum, and then turn off the ultrasonic start button. Before starting the operation, all parts that need to be cleaned should be slowly put into the cleaning basket and placed in the cleaning pool. If a large number of parts are put in at one time, they should be prevented evenly in the basket and cannot be stacked on each other.

      When the water temperature in the ultrasonic cleaner rises to about 40°C, add the corresponding parts cleaner to the cleaning pool, and at the same time gently stir the water to fully dissolve it. Of course, at this time, the ultrasonic wave or air blowing device in the ultrasonic cleaning machine can also be activated for stirring.

      Don't forget to turn on the electric control heating switch in the ultrasonic cleaning machine, but the maximum temperature of the cleaning agent can not exceed 70 ℃, otherwise it will affect the cleaning effect; not only that, but also add to the cleaning pool Appropriate water, the level of which is based on immersing the parts to be cleaned, usually not more than three-quarters of the cleaning pool.