News

      It stands to reason that the cleaning ability of the ultrasonic cleaner is obvious to all. When all aspects are set in place, it can effectively remove all kinds of dirt. But the actual situation is not so ideal. The automatic ultrasonic cleaning machine is not clean, indicating that it must not meet the requirements.

      The automatic ultrasonic cleaning machine was originally used for cleaning because it is convenient and effective, but it is actually not clean, so doesn’t it lose its original meaning?

      There are reasons for the poor cleaning effect of the automatic ultrasonic cleaning machine. On the one hand, it may be because the cleaning intensity is not enough. It is necessary to appropriately increase the cleaning frequency of the cleaning machine and increase the ultrasonic power. Cleaning, I believe the effect will be improved.

      On the other hand, it may be related to the cleaning fluid, either the choice of the cleaning fluid is incorrect, or the amount of the cleaning fluid does not match. So before that, be sure to choose a suitable cleaning machine and try to consult professionals to avoid mistakes. At the same time, control the amount of cleaning liquid used in the automatic ultrasonic cleaning machine, neither too much nor too little, otherwise it will affect the efficiency.

      There is also a possibility that the cleaning effect caused by improper cleaning temperature is not good. You must know that the automatic ultrasonic cleaning machine has a certain temperature when cleaning, but if the temperature is too low or too high If it is high, of course, the ideal cleaning effect cannot be achieved.

      In order to avoid similar problems, or to prevent large errors in human adjustment, you can use an intelligent thermostat to set the temperature to make it reach a suitable temperature to ensure automatic ultrasonic cleaning The function of the machine can be fully utilized.

      In a word, cleaning strength, cleaning solution, cleaning temperature, etc. are all important parameters that are closely related to the cleaning effect of the automatic ultrasonic cleaning machine. We must control its state well, and must not be affected by temporary neglect cleaning effect.