News

Laboratory ultrasonic cleaning machine safety operation rules:

1. The surrounding environment of the washing machine should be clean, dry and free of strong corrosive gas, and avoid violent vibration.

2. There should be enough space for heat dissipation on the back of the generator.

3. Ensure that the machine is well grounded to avoid personal injury accidents.

4. When the cleaning machine is working, do not immerse your fingers in the cleaning solution.

5. It is strictly forbidden to start the machine under no-load state. Before starting the machine, the cleaning liquid must be poured into the cleaning tank according to the liquid level in the instruction manual.

6. The objects to be cleaned in the laboratory ultrasonic cleaning machine shall not be in contact with the bottom of the tank, and the workpieces shall be placed in the basket for cleaning.

7. The cleaning solution must not be strong acid or strong alkali, and flammable solutions cannot be used without reliable safety measures.

8. The temperature of the cleaning fluid of the laboratory ultrasonic cleaning machine will increase with the continuous working time, and the continuous working time of the cleaning machine should not exceed 8 hours.

9. If it is found that there is water leakage in the cleaning tank, it should be shut down immediately, and the cleaning solution should be emptied.

10. It is not allowed to disassemble the machine without authorization.

11. After cleaning the cleaning machine with a heating device, the laboratory ultrasonic cleaning machine must turn off the heater and wait for the cleaning liquid to cool before venting the cleaning liquid.