News

Ultrasonic cell crusher is used for the crushing of small amounts of various animals, plants, viruses, bacteria and tissues, and can also be used for emulsification, separation, homogenization, extraction, defoaming, clearing, preparation of nanomaterials, dispersion and acceleration of chemical reactions, etc. . Ultrasonic cell disruptors are widely used in biology, microbiology, physics, zoology, agronomy, pharmacy, chemical industry, sewage treatment, nanomaterials and other fields, and can also be used for extraction, material preparation, extraction, emulsification, etc.

The ultrasonic cell crusher breaks and separates materials that are not very compact in structure through the cavitation of the water medium. Good effect and high efficiency. Ultrasonic cell disruptor is a multi-functional and multi-purpose instrument that uses ultrasonic waves to produce cavitation effects in liquids. It can be used for the crushing of various animal and plant viruses, cell bacteria and tissues. The ultrasonic cell crusher can also be used for emulsification and separation, homogenization extraction, defoaming and clearing, preparation of nanomaterials, dispersion and acceleration of chemical reactions. Xianou ultrasonic cell disruptor is widely used in biology, microbiology, physics, zoology, agronomy, pharmaceutical chemical industry, sewage treatment, nanomaterials and other fields.

maintenance:

For the maintenance of the instrument, the focus is on the use environment of the instrument. In addition to the above precautions, the following issues must also be paid attention to:

1. Keep the operating environment clean. The main unit of the instrument can be covered with a cloth cover when not in use to prevent dust accumulation.

2. Be careful when placing the sample in the tray, do not let the solution splash into the instrument to prevent corrosion.

3. The instrument should be handled with care, and heavy objects should not be placed on the instrument shell, so as not to affect the stability and accuracy.

Precautions for Ultrasonic Cell Disruptor:

1. The ultrasonic cell disintegrator should be placed in a clean and dry place, not in a place with humidity, high temperature, dust and corrosive gas.

2. The horn selector switch on the rear panel of the instrument should be at the corresponding position of the horn, and the new horn should correspond to the selector switch.

3. The selection of container capacity and shape should be coordinated with the sample size, and the crushing effect of the slender container is the best.

4. It is recommended to use the ultrasonic cell crusher to crush multiple times in a short time, the ultrasonic time is within 5 seconds, and the interval time is less than 5 seconds.

5. The depth of the horn wiping into the liquid level is between 10-15mm, and the end is greater than 30mm from the bottom of the container. It is strictly forbidden to start the machine when the liquid is not inserted at the end.

6. The transducer should be firmly fixed on the bracket to prevent it from sliding off the pole. Do not collide the end of the horn to prevent deformation or damage.

7. After a period of use, the end of the horn will be corroded by cavitation and hairy, which can be smoothed with a file. If the horn becomes shorter after multiple filings, the selector switch should be pulled to the corresponding position according to the actual situation.

8. Use Φ2 horn when the crushing amount is less than 5ml. At this time, the insertion depth of the horn is about 1mm, and the distance from the end to the bottom should not be less than 5mm. The ultrasonic time is preferably between 0.5-1 second.

9. Rotate the power adjustment button to adjust the power, and the power should be turned on smaller to avoid the overload of the horn and breakage. Never exceed the maximum power displayed in the right window.

10. When the ultrasonic cell disruptor fails due to an external signal or a protection indication occurs, the protection indicator light will be on, the instrument will stop working, and the staff will be prompted to remove the fault. After the fault is removed, press the protection reset button to resume normal operation.

11. Please fill in the instrument usage record in time after each use.