Technical

 Different use and purpose analysis of incubators

First of all, let's take a look at the difference and connection between the microbial incubator and the light incubator. The light incubator is mainly used for plant cultivation. The microbial incubator has different types according to the types of microorganisms to be cultivated. and anaerobic.

Look at the difference between a constant temperature incubator and a mold incubator:

Constant temperature incubator: separate water type electric heating constant temperature incubator and electric heating constant temperature incubator. Waterproof electric heating constant temperature incubator: the water jacket can still be kept at a constant temperature when the power is cut off, using microcomputer intelligent temperature controller and bimetallic sheet The regulator has two temperature control methods. Temperature control range: room temperature 5℃-60℃, can only stabilize the temperature above room temperature without refrigeration.

In the mold incubator, since the suitable growth temperature of mold is 22-28°C, the mold incubator should have a dual-system cold and heat temperature control. When the room temperature is higher than 30°C in summer, in order to ensure the suitable growth of mold, it is necessary to refrigerate and keep the temperature Lowering, when the room temperature is lower than 10 ℃ in winter, in order to ensure the suitable growth of mold, it is necessary to heat and increase the temperature. Therefore, mold incubators and constant temperature incubators with similar volumes are more expensive, about 1000-2000 yuan.

There are also biochemical incubators and mold incubators. Biochemical incubators are widely used in the cultivation and preservation of bacteria, molds, microorganisms, tissue cells, as well as water quality analysis and BOD testing, suitable for breeding experiments and plant cultivation. It is an important test equipment for scientific research institutions, colleges and universities, production units or department laboratories in biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry. The main reason is that the biochemical incubator does not have humidity control and antivirus functions, and mold has both humidity control and antivirus functions, so the mold incubator of the same volume is slightly more expensive than the biochemical incubator.